Regulations

Concerning the Setting up of Installations

Apart from the basic “Regulations of the Setting up of

Power Installations” DIN VDE*0100 and for “The Rating

of Creepage Distances and Clearances” DIN VDE 0110

Part 1 and Part 2 the regulations “The Equipment of Power Installations with Electrical Components” DIN VDE 0160

in conjunction with DIN VDE 0660 Part 500 have to be

taken into due consideration.

Further attention has to be paid to DIN VDE 0113 Part 1

and Part 200 in case of the control of working and processing machines. If operating elements are to be mounted near parts with dangerous contact voltage DIN VDE

0106 Part 100 is additionally relevant.

The user has to guarantee that the devices and the components belonging to them are mounted following these

regulations. For operating the machines and installations,

other national and international relevant regulations, concerning prevention of accidents and using technical working means, also have to be met.

Devices of Advant Controller 31 Series (AC31) are designed according to IEC 1131 Part 2. Meeting this regulation, they are classified in overvoltage category II which is

in conformance with DIN VDE 0110 Part 2.

For the direct connection of AC31 devices, which are powered with or coupled to AC line voltages of overvoltage

category III, appropriate protection measures corresponding to overvoltage category II according to IEC-Report 664/

1980 and DIN VDE 0100 Part 1 are to install.