Category: Autronica

I/O Modules  Output Module (BSB-310) with 4 monitored outputs  Output Module (BSJ-310) with 8 open collector non monitored outputs  Input Module (BSE-310) with 4 monitored inputs  Input Module (BSE-320) with 8 non-monitored inputs (galvanically isolated) Indicators  16 x 40-character alphanumeric display  Alarm, More Events, Ext. Alarm, Fault, Function Disabled, Testing, System Fault, Power, Function Delayed, Alarms Fault, Ex. Alarm Fault, Alarms Disabled, Ex. Alarm Disabled, Detector Inhibit, Local Mode.  Internal buzzer Operator Controls  More Events, Mute Panel, Silence Alarms, Reset System, Menu, Close Window  Keyboard with alphanumeric characters and scroll function  Separate buttons for menu operation  Backlit buttons and text

Description/Application BS-420MG is a maritime gas alarm control panel with full operation capabilities. All gas alarm handling and system features can be controlled and monitored from the panel. Note that the panel cannot be used for detection of fires. The panel communicates with other system units on the Ethernet-based local area network, AutroNet. The maximum number of system units supported by AutroNet depends on the type of system. In a standard system the maximum number is 64. The panel can accommodate up to a maximum of 12 I/O modules. All modules are easily plugged onto each other on a standard mounting rail inside the unit. The panel serves as an operating panel for one or several defined operation zones. The panel provides connections for 2 Ethernet ports and 2 USB host ports. The panel is menu operated on a 16-line display, with 40 characters per line. A printer is available as an option. I/O Modules  Output Module (BSB-310) with 4 monitored outputs  Output Module (BSJ-310) with 8 open collector non monitored outputs  Input Module (BSE-310) with 4 monitored inputs  Input Module (BSE-320) with 8 non-monitored inputs (galvanically isolated)

Features  Panel specifically designed for maritime gas detection  Supports all Autronica-approved gas detectors  AutroFieldBus for power supply and PowerLoop connection  User-friendly display and operator controls  Backlit operational buttons. Text display suitable for full darkness operation  Surface mounting on wall  Rack mounting in standard 19’’ cabinets  Conforms to CE standards  Designed to meet maritime SOLAS requirements (Safety Of Life At Sea) Operator Controls  More Events, Mute Panel, Silence Alarms, Reset System, Menu, Close Window  Keyboard with alphanumeric characters and scroll function  Separate buttons for menu operation  Backlit buttons and text

SD Card Replacement in BC-420. BS-420.

BS-430. BU-BV-420

Preparing for replacement

 Use an antistatic wrist strap

 Disconnect the mains power and battery backup

 Open the front panel

 Unscrew the 4 wing nuts, disconnect all cables (both

ribbon cables, Ethernet cable if used)

 Remove the front panel and place it horizontally on a

table with the yellow label facing upwards

 Tear of the yellow label in order to access the cut out

and the SD Card (see picture)

 Replace the SD Card (see detailed description on next

page)

 Place the new yellow label at the same location as the

previous one

 Reassemble the front panel, tighten the 4 wing nuts,

then reconnect all cables that have been

disconnected

 Close the front panel

SD SD Card Replacement in BC-440

Preparing for replacement

 Use an antistatic wrist strap

 Disconnect the mains power and battery backup

 Unscrew the 4 screws on the BC-440 unit

 Remove the BC-440 board, disconnect the network

cables, mains cable and AlCom+, plus AFB and serial

contacts if necessary

 Consult the drawings below

 Identify the version of the Controller board, either

BSA-400 or BSA-400A (see next page)

 Make sure you have the correct type of SD Card

according to the version of Controller board (see “SD

Card part numbers” on next page)

 Unscrew and remove the 6 screws on the BSF-440

board

 Gently place the board beside the unit without

disconnecting the ribbon cable

 Replace the SD Card (see detailed description on next

page)

 Re-place the BSF-440 board correctly onto the screw

pillars, then mount and tighten the screws

 Re-place the BC-440 unit, reconnect all cables that

have been disconnected, then mount and tighten the

4 front screws

 Perform a startup (see “Startup” on next page)

The operator panel controls and handles all operations, alarm management, indications and other functions within an operation zone. No loop driver, input or output modules can be connected to this panel. The panel communicates with controllers and the entire system via the Ethernet-based local area network; AutroNet. Please specify language GB-G when ordering. Part numbers: 116-BS-430         Operator panel kit 116-BS-430G2    Operator panel kit approved acc. to IEC 61508 SIL2 Indicators • 16 x 40-character alphanumeric display • Fire, More Events, Fire Brig. Signalled, Fault, Function Disabled, Testing, System Fault, Power, Function Delayed, Alarms Fault, Fire Brig. Fault, Alarms Disabled, Fire Brig. Disabled, Detector Inhibit, Extinguishing Activated, Extinguishing Isolated, Local Mode, Dual Safety Stdby, MultiS SmokeDis • Internal buzzer Operator Controls • More Events, Mute Panel, Silence Alarms, Reset System, Menu, Close Window • Keyboard with alphanumeric characters and scroll function • Separate buttons for menu operation (manoeuvre buttons) • Backlit buttons and text

This unit serves as a connection unit for the detection loop, alarm sounders, controls and inputs. It is a variant of the BC-420G2 controller prepared for rack installations. Together with the IO modules the unit will have the full functionality of the BC-420G2 controller. The controller is equipped with 2 Ethernet ports, one AutroFieldBus port and one serial port. The controller communicates with other system units using the Ethernetbased local area network, AutroNet and external equipment using AutroCom and Modbus. The serial port may be set to RS-232/422 or 485 and can communicate with external equipment using AutroCom, Modbus, NMEA and ESPA 4.4.4. Part numbers: 116-BC-440 Controller rack unit 116-BC-420G2 Controller rack unit approved acc. to IEC 61508 SIL2

The controller serves as a connection unit for the detection loop,

alarm sounders, controls and inputs.

The controller can accommodate up to a maximum of 12 modules.

The system offers a loop driver module for detection loops and several

types of I/O modules (see optional modules below).

A maximum of 6 loop driver modules connected to each controller.

All modules are easily plugged onto each other on a standard mounting

rail inside the unit. The controller provides connections for 2 Ethernet

ports and 2 USB host ports, and communicates with other system units

on the Ethernet-based local area network, AutroNet.

For engineering purposes, we have established kits to be equipped

according to specifications.

The controller kit includes a cabinet with a panel front, power supply module,

communication module and text foils in a chosen language.

Additionally the cabinet can be stacked with

Loop driver module BSD-310

Loop driver module H.P. BSD-311

BS-100 loop driver module BSD-330

Output module BSB-310A

Output module BSJ-310

Input module BSE-310

Input module BSE-320

An Al_Com+ stack can contain up to six loop driver modules (BSD-3xx).

By using AutroFieldBus, an additional Al_Com+ stack (with up to six additional

loop driver modules) can be added to the system.

NOTE! The AutroSafe panels are certified with the Al_Com+ modules mounted

inside the panel cabinet.

Part numbers:

116-BC-420         Controller kit

116-BC-420G2     Controller kit approved acc. to IEC 61508 SIL2

Operator Controls • More Events, Mute Panel, Silence Alarms, Reset System, Menu, Close Window • Keyboard with alphanumeric characters and scroll function • Separate buttons for menu operation • Backlit buttons and text Capacity • 64 system units (panels) on the local area network; AutroNet • 15000 loop units per system • 12 modules per fire alarm control panel, of which 6 can be Loop Driver Modules • 512 detectors and manual call points can be connected to each Fire Alarm Control Panel (EN 54) • 31 AutroFieldBus units connected to AutroFieldBus • 127 loop units connected to one detection loop • 40 socket/loop sounders connected to one detection loop • 15 loop units connected to one Powerloop

Optional Modules • Loop Driver Module (BSD-310/311) for connection of detection loops • Output Module (BSB-310) with 4 monitored outputs • Output Module (BSJ-310) with 8 open collector non monitored outputs • Input Module (BSE-310) with 4 monitored inputs • Input Module (BSE-320) with 8 non-monitored inputs (galvanically isolated) Indicators • 16 x 40-character alphanumeric display • Fire, More Events, Fire Brig. Signaled, Fault, Function Disabled, Testing, System Fault, Power, Function Delayed, Alarms Fault, Fire Brig. Fault, Alarms Disabled, Fire Brig. Disabled, Detector Inhibit, Extinguishing Activated, Extinguishing Isolated, Local Mode, Dual Safety Stdby, MultiS SmokeDis. • Internal buzzer