Category: Merlin Embedded

Specifications

• IndustryPack Slots – 4

• I/O Space – A16 space, 128 bytes per IndustryPack slot

• ID Space – A16 space, 128 bytes per IndustryPack slot

• Memory Space – A24 space: none or 128 KB to 2

MB per IndustryPack slot. A32 space: 8 MB per

IndustryPack slot fixed

• Interrupts – IndustryPack interrupts mapped 1:1 to

VME IRQ levels by shunt or PLD selections.

• Front Panel I/O Access – One pair of 50-pin right

angled keyed, shrouded ribbon cable connectors with

ejection hardware for each pair of IndustryPack slots

• Back Panel I/O Access – All 50 I/O pins from slot D

and a configurable selection of 14 pins from slot C

routed to VME bus P2 rows A and C

• Indicators – 1 green LED per slot to indicate

accesses. 1 green LED to show power to slots A and

B. 1 green LED to show power to slots C and D

• IndustryPack Site Features – 8 MHz only. IO cycles,

ID cycles, memory cycles, interrupt acknowledge

cycles. 32-bit interface and IndustryPack DMA are

not supported.

VME Specifications

• Conforms with VME Specifications Revision C.1

IEEE Std. 1024/D2

• Board size: 6U

IndustryPack Specification

• ANSI/VITA-4 1995

Power Requirements

• +5V @ 500mA max

• +12V @ 10mA

•-12V @ 10mA

Environmental

• Operating Temperature: 0 to 70 °C

• Storage Temperature: -40 to 85 °C

• Shock: 25g, 11ms on all axis

• Humidity: 80% Rel. Humidity, non-condensing

Environmental

• Operating Temperature: -20 to 85 °C

• Storage Temperature: -40 to 125 °

• Shock: 25g, 11ms on all axis

• Humidity: 95% Rel. Humidity, non-condensing

The MVME4905 is designed to be a drop-in

replacement for the VMIVME-4905 from GE-IP. The

MVME4906 is designed to be a drop-in replacement

for two VMIVME-4905’s on the same board.  The unit

offers the following improvements over the GE-IP

VMIVME-4905

• The MVME4906 can be configured as two VMIVME

4905’s with a different base address jumper and I/O

connector for each set of two channels.

• Onboard built in test emulates the VMIVME-4905

with a VMIVME-4911.  S/D section has its own base

address jumper.

• Optical Isolation

• Price is 30% less than VMIVME-4905.

• No external 15V supply is required.

• Conduction cooled version available.

The MVIPC-616 4-Slot VME-IndustryPack

Carrier card is a drop-in-replacement for the

GE-IP SBS VIPC616 and VIPC618

Features

The MVIPC-616 provides mechanical

mounting and the electrical interface from the

VME backplane to 4. single-wide

IndustryPacks or up to 2. double-wide

IndustryPacks. The carrier supports I/O, ID,

memory, and interrupt functions.  It conforms

to the IndustryPack Logic Interface Specification.

• Conformal coating is standard on all units.

• Conduction-cooled version available

As with all Merlin Embedded DIR products, the

MVIPC-616 has the same, or better, functional

performance than the product it is replacing. All

Merlin Embedded products are backed by a 2

year warranty and 15 years of life-cycle

support. The user will not have to take on any

obsolescence issues when utilizing Merlin

Embedded products

Specifications

• IndustryPack Slots – 4

• I/O Space – A16 space, 128 bytes per IndustryPack slot

• ID Space – A16 space, 128 bytes per IndustryPack slot

• Memory Space – A24 space: none or 128 KB to 2

MB per IndustryPack slot. A32 space: 8 MB per

IndustryPack slot fixed

• Interrupts – IndustryPack interrupts mapped 1:1 to

VME IRQ levels by shunt or PLD selections.

• Front Panel I/O Access – One pair of 50-pin right

angled keyed, shrouded ribbon cable connectors with

ejection hardware for each pair of IndustryPack slots

• Back Panel I/O Access – All 50 I/O pins from slot D

and a configurable selection of 14 pins from slot C

routed to VME bus P2 rows A and C

• Indicators – 1 green LED per slot to indicate

accesses. 1 green LED to show power to slots A and

B. 1 green LED to show power to slots C and D

• IndustryPack Site Features – 8 MHz only. IO cycles,

ID cycles, memory cycles, interrupt acknowledge

cycles. 32-bit interface and IndustryPack DMA are

not supported.

VME Specifications

• Conforms with VME Specifications Revision C.1

IEEE Std. 1024/D2

• Board size: 6U

IndustryPack Specification

• ANSI/VITA-4 1995

Power Requirements

• +5V @ 500mA max

• +12V @ 10mA

•-12V @ 10mA

Environmental

• Operating Temperature: 0 to 70 °C

• Storage Temperature: -40 to 85 °C

• Shock: 25g, 11ms on all axis

• Humidity: 80% Rel. Humidity, non-condensing

The MVIPC-616 4-Slot VME-IndustryPack

Carrier card is a drop-in-replacement for the

GE-IP SBS VIPC616 and VIPC618

Features

The MVIPC-616 provides mechanical

mounting and the electrical interface from the

VME backplane to 4. single-wide

IndustryPacks or up to 2. double-wide

IndustryPacks. The carrier supports I/O, ID,

memory, and interrupt functions.  It conforms

to the IndustryPack Logic Interface Specification.

• Conformal coating is standard on all units.

• Conduction-cooled version available

As with all Merlin Embedded DIR products, the

MVIPC-616 has the same, or better, functional

performance than the product it is replacing. All

Merlin Embedded products are backed by a 2

year warranty and 15 years of life-cycle

support. The user will not have to take on any

obsolescence issues when utilizing Merlin

Embedded products