Supported Industrial
Ethernet Protocols:
Modbus TCP Interface
The Modbus TCP interface will support Modbus data
sources such as PLCs, MCCs, analyzers and similar devices
communicating Modbus TCP. The Modbus TCP interface is a
Modbus Client reading and writing data from/to Modbus Server
devices. The Modbus server devices can be Modbus TCP devices
or Modbus serial devices using a Modbus TCP gateway.
The Modbus TCP interface supports the following types of
data access:
Reading input data from Modbus Coils, Discrete Input,
Holding Registers, and Input Registers.
Writing output data to Coils and Holding registers.
All reads will be performed periodically and outputs will be
sent when they are written.
EtherNet /IP
The EtherNet/IP protocol allows data sources such as
PLCs, Intelligent Field Devices (IFDs), variable-speed drives,
MCCs, and analyzers; as well as other devices communicating
EtherNet/IP to connect directly in to DeltaV via the EIOC.
The EtherNet/IP interface will support connections for
both implicit and explicit messaging to allow access to both
Class 1 and Class 3 EtherNet/IP I/O adapters. Redundancy with
EtherNet/IP Class 1 Implicit and Class 3 Explicit messaging
for control (sending outputs to the devices) require special
considerations due to exclusive owner communications defined
by the protocol. Please refer to the DeltaV System Planning
Guide for more information. Class 3 PCCC and UCMM with
www.abb-drive.com Logix tags message classes are also supported.
IEC 61850 (MMS)
The IEC 61850 MMS interface will allow data from Intelligent
Electronic Devices (IEDs) such as motor protection relays,
motor starters, motor control centers, switchgear, and similar
MMS-based devices to be integrated into DeltaV. The MMS
interface will be a client reading and writing data from/to the
Intelligent Electronic Device which acts as the server.
The EIOC only supports reading and writing of real time
signals using this protocol. Reading historical data or
Goose applications are not supported.
Leave a comment
Your email address will not be published. Required fields are marked *